If you also encounter this problem, problem most likely lie on your BIOS setting.
- Go into your BIOS menu, press F2 while system is power on.
- Go to Boot -> Boot Settings Configuration
- And change the EM0 FUN0 OPTION ROM to enable (I have doubt on why there is FUN0 to FUN7 and i only need to enable FUN0, search internet but can't seems to find any explanation, if you know please post on the comments. However, i do know the Qlogic card plug at EM x.0 where x is the slot number)
- Finally reboot and you should be able to see the CTRL-Q
Enable EM0 FUN0 OPTION ROM
Can see CTRL-Q
Enable EM0 FUN0 OPTION ROM
Can see CTRL-Q
1 comment:
Thank you for your post. It helped a lot. Not at the first time though :o)
I enabled FUN0 only and did not get anything but two more network cards. My add-on card has two network ports and two FCs. When I enabled all FUNx, I got my QLogic LUNs. So, I think thoses FUNs are just for potential connections and on card cannot have more than 8 different connections. For example, mine has four
Post a Comment